JiaBaiDa UP16S010 16S 48V 100A 150A 200A Energy Storage LiFePO4 BMS

Category：Energy storage

Inquiry

View more products

None

JBD-AP20S003

Details

Introduction of UP16S010 Software BMS - Energy Storage 16S 48V 100A 150A 200A LiFePO4 BMS

JBD-UP16S010 smart bms is a software protection board solution specifically designed for 16 string battery packs, suitable for lithium cells with different chemical properties, such as lithium ions, lithium polymers, lithium iron phosphate, etc. The bms is suitable for family energy storage, inverter and industrial equipment, and it supports 100A~200A continuous current. By the way, UP16S010 also supports UART, RS485 and CAN Bus communications.
The entire system adopts an O2 analog front-end acquisition chip+MCU, with an external communication port. Some parameters can be flexibly adjusted according to customer needs through the upper computer.

Parameter of UP16S010 ESS Smart BMS

LiFePO4 Battery Protection Board

Cell Specification	16 Strings of LiFePO4 Battery
Port Type	Charging and Discharging are Same Port
Charging Voltage	3.6V * Number of Strings
Cell Voltage Range	2.7V~3.65V
Continuous Charging Current	100A~200A
Continuous Discharging Current	100A~200A
Consumption of Running	≤40mA
Consumption of Sleep	≤0.4mA
Circuit Resistance	≤10mR
Operating Temperature	-20℃~75℃
Structure Size of Software BMS
Size	300（±0.5）100（±0.5）38（±2）mm

Function of UP16S010 Software BMS

Function	Configuration	Function	Configuration
Number of Strings Supported	16S	485 Communication(Isolated)	Optional
Continuous Current	100A~200A	UART Port(Isolated)	Not Supported
Number of NTCs	2 Built-in, 4 External	CAN Communication	Standard Option
Balance Function	Passive Balance	232 Communication	Standard Option
UART(Non-isolated)	Standard Option	Heating Function	Not Supported
Switch Function	Standard Option	Module of Bluetooth	Not Supported
Charging Current Limit	Standard Option	Battery Packs in Series	Not Supported
Battery Packs in Parallel	Supported	Secondary Protection	Not Supported
History Storage	Standard Option	LCD Dispaly	Standard Option
Pre-discharge Function	Standard Option	LED Indicator Port	Standard Option
Buzzer	Not Supported	GPS Port	Not Supported

Communication Functions

RS485 communication&UART communication

Various information of the battery can be monitored through the upper computer, including battery voltage, current, temperature, status, and battery production information. The default baud rate is 9600bps.

CAN Bus communication

Environment configuration: To install the USBCAN Driver into a computer, it is necessary to first verify the computer operating system, which matches different driver files for 32-bit and 64-bit operating systems. (32-bit operating system matches file suffix 'x86', 64 bit operating system matches file suffix 'x64'). Finally, you can check the port in the device manager of the computer to see if the installation was successful.

Connection method: Insert the USB cable of the communication box into the USB port of the computer, and connect the other end to the corresponding interface of the battery protection board.

Communication format: Select CAN by default for ID_ ID_ 0. The CAN device is selected based on the type of communication box, with a default baud rate of 500K and a default channel selection of 0.

About UP16S010 Software BMS - Energy Storage 16S 48V 100A 150A 200A LiFePO4 BMS

energy storage bms