JiaBaiDa SP24S004 LiFePO4 Li-ion BMS with UART Bluetooth

Category：Bluetooth remote management

Inquiry

View more products

JiaBaiDa SP17S005 LiFePO4 Li-ion 10S 12S 13S 14S 16S 17S BMS

JBD SP15S020A LFP NMC 6S 7S 8S 10S 13S 14S 15S 24V 36V 48V Smart BMS

Details

Introduction of SP24S004 Software BMS - LiFePO4 Li-ion BMS with UART Bluetooth

JBD-SP24S004 smart bms is a software battery protection board scheme specially designed for 8~24 strings of lithium battery packs. SP24S004 supports two communication methods, UART and bluetooth, while also supporting continuous currents of 40A to 200A. The product adopts architecture of front-end acquisition chip + MCU, and some parameters can be flexibly adjusted through the host computer according to customer needs.

Parameter of SP24S004 Software BMS

LiFePO4 Battery Protection Board - 8S 12S 16S 20S 24S LFP BMS

Cell Specification	8~24 Strings of LiFePO4 Battery
Port Type	Charging and Discharging are Same Port
Charging Voltage	3.6V * Number of Strings
Cell Voltage Range	2.2V~3.75V
Continuous Charging Current	40A~200A
Continuous Discharging Current	40A~200A
Consumption of Running	≤20mA
Consumption of Sleep	≤200μA
Sleep Conditions	Delay 60s under states in nocurrent\communication\protection (settable)
Circuit Resistance	≤10mR
Operating Temperature	-20℃~75℃
Structure Size of Software BMS
Size	170±2mm * 100±1mm * 12±2mm

Li-ion Battery Protection Board - 17S 20S 21S NMC BMS

Cell Specification	17~21 Strings of Li-ion Battery
Port Type	Charging and Discharging are Same Port
Charging Voltage	4.2V * Number of Strings
Cell Voltage Range	2.8V~4.25V
Continuous Charging Current	50A~100A
Continuous Discharging Current	50A~100A
Consumption of Running	≤20mA
Consumption of Sleep	≤300μA
Sleep Conditions	Delay 60s under states in nocurrent\communication\protection (settable)
Circuit Resistance	≤10mR
Operating Temperature	-20℃~75℃
Structure Size of Software BMS
Size	170±2mm * 100±1mm * 13±2mm

Function of SP24S004 Software BMS

Function	Configuration	Function	Configuration
Number of Strings Supported	8S~24S	485 Communication(Isolated)	Optional
Continuous Current	40A~200A	UART Port(Isolated)	Not Supported
Number of NTCs	1 Built-in, 4 External	CAN Communication	Optional
Balance Function	Passive Balance	232 Communication	Not Supported
UART(Non-isolated)	Standard Option	Heating Function	Not Supported
Switch Function	Optional	Module of Bluetooth	Standard Option
Charging Current Limit	Optional	Battery Packs in Series	Not Supported
Battery Packs in Parallel	Not Supported	Secondary Protection	Not Supported
History Storage	Supported	LCD Dispaly	Optional
Pre-discharge Function	Supported	LED Indicator Port	Not Supported
Buzzer	Optional	GPS Port	Optional

Note:

The UART interface (non-isolated) does not support communication with chargers or loads.
The battery pack can be used in series, but the total number of strings after series is required to be less than or equal to 32.
6 ~ 22 battery cells are protected in series, and the number of battery strings is automatically identified.

Communication Functions

SP24S004 smart bms supports two communication methods, Bluetooth and uart.

The connection method is: after installing the special driver for our communication box on the computer side, insert the USB end of the communication box into the USB port of the computer, and connect the other end to the corresponding interface of the protective board that has been connected to the battery. Open the host computer, click the communication port settings, select the CMO port corresponding to the communication box, other options

do not move, after confirmation, click Start, you can read the protected data. If you need to change the parameters of the protection plate, you must first click Read Parameters on the Parameters page before changing the parameters.

About SP24S004 Smart BMS

jiabaida sp24s004 smart bms