Dongguan jiaxa Electronic Technology Co., Ltd.
Intelligence only for the safety of lithium

Wechat :

二维码

Tel : 0769-82960405

Chinese English

Current location :   News>   Smart BMS FAQ >  News detail
HP wiring diagram Smart BMS FAQ Hardware BMS FAQ software downlaod SP wiring diagram ZP wiring diagram MP wiring diagram BP wiring diagram
Why the first and second series of 0. A few volts, the measurement of the battery voltage is available?
Pubdate : 2018-03-30

Generally, this is because the B-thick wire is not welded well. Please check whether your BMS has welded the B-thick wire to the total negative electrode of the battery. B- The thicker the welding line, the shorter the line, the better. If the line is too long and too thin, it is easy to burn the board.

Relevant information: Why can't it be charged and discharged after it is installed?Why not turn on balance?Why does the BMS only balance the battery on one side?What is the meaning of the letter B after each battery voltage displayed by Xiaoxiang APP?Why does one battery have no voltage and the next battery has high voltage? The battery voltage is normal.
Dongguan jiaxa Electronic Technology Co., Ltd.
淘宝 阿里巴巴
Why the first and second series of 0. A few volts, the measurement of the battery voltage is available?
Pubdate: 2018-03-30

Generally, this is because the B-thick wire is not welded well. Please check whether your BMS has welded the B-thick wire to the total negative electrode of the battery. B- The thicker the welding line, the shorter the line, the better. If the line is too long and too thin, it is easy to burn the board.

回到首页