Dongguan jiaxa Electronic Technology Co., Ltd.
Intelligence only for the safety of lithium

Wechat :

二维码

Tel : 0769-82960405

Chinese English

Current location :   News>   Hardware BMS FAQ >  News detail
HP wiring diagram Smart BMS FAQ Hardware BMS FAQ software downlaod SP wiring diagram ZP wiring diagram MP wiring diagram BP wiring diagram
Why is overcharging unprotected?
Pubdate : 2018-03-24

Lifepo4 overcharge protection voltage is 3.75V, li-ion overcharge protection voltage is 4.25V, as long as a string of batteries reach this protection voltage will be all protected, if not reached is not protected; If the voltage is reached and there is no protection above the parameter 0.03V, you should carefully check whether the wiring is connected wrong, whether the charging negative electrode is connected to the corresponding position according to the wiring diagram, and whether the charger is matched with the charger; If all the conditions checked are normal, it can be considered that the charging MOS of the protection plate has been broken down, which needs to be sent back to the manufacturer for testing.

Relevant information: Why can't it be charged after discharge protection?Why is overcharging unprotected?Why only turn on one or two lights after charging? Why is the BMS unbalanced?Wiring pointsWhy after charged , put a while electricity protection? Why does the power go off when climbing a hill?
Dongguan jiaxa Electronic Technology Co., Ltd.
淘宝 阿里巴巴
Why is overcharging unprotected?
Pubdate: 2018-03-24

Lifepo4 overcharge protection voltage is 3.75V, li-ion overcharge protection voltage is 4.25V, as long as a string of batteries reach this protection voltage will be all protected, if not reached is not protected; If the voltage is reached and there is no protection above the parameter 0.03V, you should carefully check whether the wiring is connected wrong, whether the charging negative electrode is connected to the corresponding position according to the wiring diagram, and whether the charger is matched with the charger; If all the conditions checked are normal, it can be considered that the charging MOS of the protection plate has been broken down, which needs to be sent back to the manufacturer for testing.

回到首页