Dongguan jiaxa Electronic Technology Co., Ltd.
Intelligence only for the safety of lithium

Wechat :

二维码

Tel : 0769-82960405

Chinese English

Current location :   News>   Hardware BMS FAQ >  News detail
HP wiring diagram Smart BMS FAQ Hardware BMS FAQ software downlaod SP wiring diagram ZP wiring diagram MP wiring diagram BP wiring diagram
Why can't charge after connect the line, can discharge?
Pubdate : 2018-03-23

Use a multimeter to measure the battery voltage of each string to see if the battery voltage is full at this time, which leads to the over-charge protection of the BMS. You can first discharge for a period of time, and then charge for use when the voltage drops.

Relevant information: Why can't it be charged after discharge protection?Why is overcharging unprotected?Why only turn on one or two lights after charging? Why is the BMS unbalanced?Wiring pointsWhy after charged , put a while electricity protection? Why does the power go off when climbing a hill?
Dongguan jiaxa Electronic Technology Co., Ltd.
淘宝 阿里巴巴
Why can't charge after connect the line, can discharge?
Pubdate: 2018-03-23

Use a multimeter to measure the battery voltage of each string to see if the battery voltage is full at this time, which leads to the over-charge protection of the BMS. You can first discharge for a period of time, and then charge for use when the voltage drops.

回到首页